Title

• Common Remote Command Codes

VSP 112/ VSP 526

Set the input source:
SourceCodeCV1 CV2 CV3 S-VideoYPbPr VGA DVI USB Set Brightness: BrightnessCode50 0x16 (hexadecimal) is the checksum value = 0x80 +0 x32 +0 x32 +0 x32 0x32 (hexadecimal) represents the luminance value is equal to decimal 50 Three 32 denote red green blue intensity value Set Contrast: ContrastCode50 0x18 (hexadecimal) is the checksum value = 0x80 +0 x02 +0 x32 +0 x32 +0 x32 0x32 (hexadecimal) represents the contrast value is equal to decimal 50 Three 32 denote red green blue contrast values ​​(three values ​​to be the same, if different work). Set the color temperature: ContrastCode50 0x18 (hexadecimal) is the checksum value = 0x80 +0 x04 +0 x32 +0 x32 +0 x32 0x32 (hexadecimal) represents the contrast value is equal to decimal 50 Three 32 denote the color temperature of red green blue

• No Output

VSP 516/VSP 618/VSP 709

Check the output config of the input video.
Check the input channel config is ok. for example : CVBS1 interface is connected to the composite interface of video source.
Check the connection of output is ok.
Check the target monitor or display is not destroied or power down.
Check the output resolution of processor is within the maximise resolution range of target display.
Check ALPHA value is not 0.

• How to Control Remotely

VSP 729

VSP729 can be controlled remotely via RS232. Refer to the Open API Documentation for more information Common Commands Set Input Source: ChannelCV1CV2YPbPrVGADV11234 Select (Preview) Channel Channel/Output1234 TAKE to Output CutTAKE Set Transition Effect: CutTAKE

• Common RS232 Control Codes

VSP 5161/VSP 5161S/VSP 5162/VSP 5162S

Selecting input signals for the first channel/layer to output example SDI source Select SDI signal Set signal to Preview for first chanel TAKE/switch to the main output alternatively CUT to the main output Selecting Input Signals for First Channel SignalCodeCV1CV2DVI1VGA1SDI Selecting input signals for the second channel/layer to output example CV3 source Select CV3 Set signal to Preview for second chanel TAKE to the main output Selecting Input Signals for Second Channel SignalCodeCV3CV4DVI2VGA2 Selecting input signals for the third channel/layer to output example DVI3 Preview select DVI3 TAKE to main outputSelecting input signals for the fourth channel/layer to output Example DVI4 Preview select DVI4 TAKE to main output Selecting input signals for the fifth channel/layer to output Preview select VGA3 TAKE to main output Selecting input signals for the sixth channel/layer to output Preview select VGA4 TAKE to main output Saving Presets (User Mode)User ModeCode1234